15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 01/07/11 all specifications subject to change without notice. unless otherwise specified all tolerances are: 0.25 in mm mechanical with integrated magnetics,tab down single port rj45 connector ARA517-1002S 10/100/1000 base-t ethernet application meets ieee 802.3 & ansi x 3.263 standards impedance: 100ohms transmit open circuit inductance (ocl): 350uh (min) @100khz,0.1vrms with 8ma dc bias always eu rohs/elv compliant, wave solder capable to 265c rj45 jack cavity conforms to fcc rules and regulations part 68, sub part f standard operating temp: 0oc to +70oc allied ARA517-1002S yyww electrical speci?cations @ 25c insertion loss ( db max ) cmrr (db min) 0.5-100mhz 0.5-40mhz 40.1-100mhz 0.5-40mhz 40.1-100mhz 0.5-100mhz ARA517-1002S 1ct:1ct return loss (db min) cross talk (db min) hi-pot (vdc) ocl(uh min) @100khz/0.1v wi/ 8ma dc bias turns ratio chip: cable (3%) led (l/r) 350 part number emi fingers 2. 54 13.50 8.89 3.05 21.60max 15.90 3.50 back view p 1 p 1 0 no no 1.1 18 12-20*log(f/80) 33-20*log(f/50) 35 30 2250
15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 01/07/11 unless otherwise specified all tolerances are: 0.05 in mm pcb layout schematics ARA517-1002S ARA517-1002S notes: 1.r1-r4=75ohms,1/16w,5%resistors. 2.c1=1000pf,2kv decouping capacitor. with integrated magnetics,tab down single port rj45 connector materials ARA517-1002S housing: pbt, flammability rating 94v-o. shell: c2680 brass, 0.20mm thick, 50u" min nickel plating. mod jack contacts: phosphor bronze, 0.35mm thick, 6u" gold plated. 9 1 3 .05 8 .89 11 .43 1 5. 49 2. 54 1. 27 10 2 2. 54 9*1.27=11.43
|
